EXPO™ Electric Drum Heaters, with thermostat control and three-heat
switch, are designed for use on 55 gallon all metal drums containing
materials with good heat receptivity.
This unit has a thermostat range of 60° – 250° F and standard 120V rating.
The thermostat control is numbered 1-7. The three-heat switch allows
for three wattage ranges per thermostat setting - the high setting is
for the maximum watts (1920), the medium setting is for half the wattage
(960), and the low is for 480 watts.
Electric drum heater installs easily with a spring-loaded toggle clamp,
for a snug fit around the steel drum. This heaters has a NEMA 5-20P
Plug. This heater is for indoor use only.
The heater is equipped with neon pilot lights. The green pilot light
will glow as long as the heater is plugged in. The red pilot light will
glow until the heater reaches the set temperature and will go on and off
as the thermostat cycles.
- UL Listed
- CSA Certified
- One year warranty
-
16.0
55 gallon
5-20 P
Output 1920W @ 120V
60 - 250
120
1920-960-480
15 lb
22 1/2"
5 3/8"
This heater is for use with steel drums that do not contain a removable plastic liner.
Electric drum heater is to be used to heat NON-FLAMMABLE, NON-COMBUSTIBLE materials only in a NON-HAZARDOUS area.
Caution: Allowing liquid in a container to fall below the level of the
heater will render the heater ineffective and could irreparably damage
the baked on epoxy phenolic lining in lined steel drums and pails.