This MORSE Hydra-Lift Karrier has Hydraulic Lift and Manual
Tilt. It allows one person to easily handle a fully loaded drum, up to
800 lb or half-full drums up to 500 lb. A half full drum will be
unbalanced and bottom heavy so when you tilt it, the load shifts
differently than if it were a full drum.
The MORCinch feature is designed to automatically adjust for 22 inch to
23 1/2 inch diameter steel or plastic drums. The manual tilting
gear-drive has a hand crank to control the degree of tilt. It allows the
drum to be rotated 360° either direction, holding the drum at any angle
desired.
All welded steel frame rolls easily on two 8 inch polyolefin wheels and
two 4 inch swivel casters, which are hidden under the base. It can be
screwed into the plant floor if necessary. The hand-operated hydraulic
pump gives full lift in about 45 strokes, which lifts the drum up to 60
inches.
Options Available include: Drum adapters for handling smaller drums, Bracket (Product code 4556-P) or Rim Clamp (Product code
4560-P) for handling plastic drums, and the MORStop Tilt-Brake which
automatically stops and holds the tilt angle of the drum.
Spark-resistant models are available through special order.
- Load, move, lift, tilt and drain full drums
- Safe, one-person operation
- Spark resistant models and various options are available through special order
-
55"
60"
44"
72"
Hand Crank
301 lb