This MORSE
® Hydra-Lift Karrier has Manual Tilt and Power
Lift. The power-lift option eliminates the manual effort to lift the
drum. This model has a 115 VAC, 1HP, single-phase TEFC electric motor,
supplied with a 3-wire cord, plug and switch. The manual tilt is pull
chain-wheel driven. It allows the drum to be rotated 360° either
direction, holding the drum at any angle desired.
All welded steel frame rolls easily on two 8 inch poly olefin wheels and
two 4 inch swivel casters, which are hidden under the base. It can be
screwed into the plant floor if necessary. The drum can be lifted up to
96 inches. The MORCinch feature is designed to automatically adjust
for 22 inch to 23 1/2 inch diameter steel or plastic drums.
Options Available include: Drum diameter adapters for handling smaller drums, Bracket (Product code 4556-P) or Rim Clamp (Product code
4560-P) for handling plastic drums and the MORStop Tilt-Brake which
automatically stops and holds the tilt angle of the drum.
Spark-resistant and Stainless Steel models are available through special
order. Call our Customer Service Experts at 918-427-3600 for
details.
- Drum handler lifts and/or tilts drums
- Eliminates manual effort
- 800 lb. capacity/500 lb half drum capacity
-
69"
72 1/2"
49"
96"
Electric
Chain Wheel
384 lb
A half full drum will be unbalanced and bottom heavy so when you tilt
it, the load shifts differently than if it were a full drum.